BMWGQ - MULTI-PURPOSE GEAR LUBRICANT NO.90
- MSDS: BMWGQ
- Manufacturer: AMOCO OIL CO
- Product Name: MULTI-PURPOSE GEAR LUBRICANT NO.90
- National Stock Number: 9150-00-240-2251
Product Identification
Product ID:MULTI-PURPOSE GEAR LUBRICANT NO.90
MSDS Date:08/15/1986
FSC:9150
NIIN:00-240-2251
MSDS Number: BMWGQ
Responsible Party
CHICAGO, IL 60601
US
Emergency Phone: 800-447-8735;800-424-9300(CHEMTREC)
Info Phone: 312-856-3907
Preparer: STEPHEN A. ELBERT
Cage: 15958
Contractor
Telephone: 800 447-8735
Cage: 15958
Ingredients
MINERAL OIL, PETRO DISTILLATES, SOLV-REFINED HEAVY
CAS: 64741-88-4
RTECS: PY8040500
OSHA PEL 5 MG/M3
ACGIH TLV: 5 MG/M3;10 STEL
SOLVENT REFINED RESIDUUM;
CAS: 64742-01-4
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE:NO SIGNIFICANT IRRITATION
EXPECTED. SKIN:NONE EXPECTED FOR SINGLE SHORT-TERM EXPOSURES.
PROLONGED OR REPEATED CONTACT MAY PRODUCE SOME IRRITATION.
INHAL:NONE EXPECTED UNDER NORMAL CONDITIONS OF US E.
INGEST:EXPECTED TO BE RELATIVELY NON-TOXIC.
Explanation of Carcinogenicity:CAS NO.64741-88-4 IS LISTED IN THE RTECS
AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH W/PLENTY OF WATER FOR AT LEAST 15 MINUTES.
SKIN:FLUSH W/COPIOUS AMOUNTS OF WATER. CALL MD . INHAL:REMOVE TO
FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF RESP) . INGEST:IF A
LARGE AMOUNT IS SWALLOWED, INDUCE VOMITING. GET MEDICAL ATTENTION.
Fire Fighting
Flash Point Method:COC
Flash Point:>380F,>193C
Extinguishing Media:AGENTS APPROVED FOR CLASS B HAZARDS (E.G., DRY
CHEMICAL, CO*2, HALOGENATED AGENTS, FOAM, STEAM) OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE
Accidental Release
Spill Release Procedures:TREAT AS AN OIL SPILL. CONTAIN & REMOVE BY
MECHANICAL MEANS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NO SPECIAL STORAGE REQUIREMENTS.
Other Precautions:AVOID STRONG OXIDIZERS.
Exposure Controls
Respiratory Protection:NONE REQUIRED FOR NORMAL CONDITIONS OF USE. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
HCC:V6
Melt/Freeze Pt:M.P/F.P Text:15.0F,-9.4C
Spec Gravity:0.9 (H*2O=1)
Solubility in Water:NEGLIGIBLE, <0.1%
Appearance and Odor:OILY LIQUID.
Stability
Stability Indicator/Materials to Avoid:YES
AVOID STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:DISPOSAL MUST BE I/A/W APPLICABLE FEDERAL, STATE
OR LOCAL REGULATIONS. ENCLOSED-CONTROLLED INCINERATION IS
RECOMMENDED UNLESS DIRECTED OTHERWISE BY APPLICABLE ORDINANCES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.